KPMF Satin Desert Storm - K75557 - vehicle wrapping film with a satin finish. Dry application, air-release adhesive and repositionability during installation.
Roll width: 1.52 m
Choose the length: 1 m, 2 m, 3 m...
Series: K75500
KPMF · VEHICLE WRAPPING FILM
Choose KPMF Satin Desert Storm - K75557 as a starting point for a restrained beige for a custom look built around natural tones. The satin finish offers subdued reflections and highlights body volume with a restrained sheen.
Desert Storm takes a colour direction inspired by natural desert tones. It is a design option for black, bronze or other earth-toned accents.
PVC wrapping film with air-release adhesive and repositionability during installation. The material is intended for dry application to properly prepared surfaces. Installation on curves and recesses requires the manufacturer's instructions and correct substrate preparation.
Use care products compatible with satin finishes to maintain an even appearance.
Check a physical swatch when choosing KPMF Satin Desert Storm - K75557. Photographs and screens can display the shade and reflections differently. Plan material from the same batch for one installation.
Intended use: Cars, Trucks, Trailers, Boats, Buses, Caravans
Application surfaces: Compound curves, Simple curves, Corrugations, Flat surfaces, Riveted flat surfaces, Concave surfaces
Maximum durability: 8 years (vertical), 3 years (horizontal)
Opacity: High
Film type: Cast film
Roll dimensions: 1,52 x 25 M
Adhesive type: Sensibil la presiune
Film width: 152 cm
Film thickness: 80 µm
Film material: Polyvinyl chloride (PVC)
Film use: Exterior
Adhesive colour: Grey or clear, depending on the film colour
Air-release channels: Yes
Repositionable: Yes
Application method: Dry
Removal method: With heat
Film grade: Premium
Minimum application temperature: +16°C
Service temperature: -60°C / +107°C
Release liner material: Polyethylene-coated kraft paper
Film category: Wrapping
Film colour: Beige
Film finish: Satin