APA Ultra Gloss Metallic Dead Red - vehicle wrapping film with a high gloss finish. Dry application, air-release adhesive and repositionability during installation.
Roll width: 1.52 m
Choose the length: 1 m, 2 m, 3 m...
Series: Ultrajet
Delivery date: 3-4 sapt.
APA · VEHICLE WRAPPING FILM
For a body colour change, APA Ultra Gloss Metallic Dead Red offers an expressive red for a colour change with a sporting character. The high-gloss finish emphasises reflections and gives a visual effect close to a lacquered surface.
For a project built around Ultra Gloss Metallic Dead Red, maintain a visual connection between the broad panels and the vehicle accessories. For a balanced overall look, keep wheels and trims in neutral tones and let the film colour take the lead. The metallic effect adds visual detail to the colour, particularly where light follows the body curves.
PVC film for vehicle customisation, with air-release adhesive and repositionability during application. Install dry on a clean, prepared surface. Installation on curves and recesses requires the manufacturer's instructions and correct substrate preparation.
To retain surface clarity, use film-compatible cleaning products and avoid abrasive materials.
Check a physical swatch when choosing APA Ultra Gloss Metallic Dead Red. Photographs and screens can display the shade and reflections differently. Plan material from the same batch for one installation.
Film finish: High gloss, Gloss
Film type: Cast
Air-release channels: Yes
Film width: 152 cm
Adhesive type: Sensibil la presiune
Film material: Polyvinyl chloride (PVC)
Intended use: Cars, Trucks, Trailers, Boats, Caravans, Buses
Application surfaces: Simple curves, Corrugations, Flat surfaces, Riveted flat surfaces, Concave surfaces, Compound curves
Film use: Exterior
Adhesive colour: Grey or clear, depending on the film colour
Repositionable: Yes
Application method: Dry
Removal method: With heat
Film grade: Premium
Maximum durability: 4 years
Minimum application temperature: +15°C
Service temperature: -50°C / +90°C
Release liner material: Kraft paper coated with polyethylene
Film category: Wrapping film
Film colour: Red colour
Film thickness: 160 µm, 0,16 mm
Roll dimensions: 1,52 x 25 M